Software

Simplify3D - Print settings for the Creatr HS
This solution instructs you how to manually configure Simplify 3D for optimum quality output with the Creatr HS. Looking for Creatr HS XL or Creatr HS Lit...
Tue, 20 Sep, 2022 at 6:37 PM
Simplify3D - Print settings for the Creatr HS XL
This solution instructs you how to manually configure Simplify3D for optimum quality output with the Creatr HS XL. The next Simplify3D update will have ...
Tue, 20 Sep, 2022 at 6:38 PM
Materialise - Creatr 2.1.0 Creatr (HS)
Please find below the download links for Materialise Creatr 2.1.0 Create Software 64bit - Licensed Create Software 32bit - Licensed Create Software OSX -...
Tue, 20 Sep, 2022 at 6:26 PM
Simplify3D - Print settings for the Creatr HS Lite
This solution instructs you how to manually configure Simplify3D for optimum quality output with the Creatr HS Lite. The next Simplify3D update should h...
Tue, 20 Sep, 2022 at 6:38 PM
Cura - How to Configure Cura - Leapfrog Creatr HS 3D Printer
This solution article will explain how to set-up the printer as a 'Custom FFF printer' in Cura. Cura is a free slicer that can be used on your compu...
Tue, 20 Sep, 2022 at 6:36 PM
Materialise - Creatr License / Voucher
Materialise If you had a License for the Slicer, originally delivered, and need assistance with that, please contact https://www.materialise.com/en/get-i...
Tue, 20 Sep, 2022 at 6:27 PM
Simplify3D - My Printed Object is Shifted
This article is for Simplify3D users that may be experiencing shifting of print models. If you are using an older version of Simplify3D, you may experienc...
Tue, 20 Sep, 2022 at 6:38 PM
Materialise - User Manual - for Creatr HS
Please find the following document available for download below: Leapfrog-3D-Printers_Manual-Creatr-HS_EN_Materialise-Mac_v2.2 2.pdf Leapfrog-3D-Printers_...
Tue, 20 Sep, 2022 at 6:27 PM
Materialise - Why does the temperature value change when I print a gcode made with the Materialise software?
Note: The images used in this solution article are from the current Windows version of Materialise; the Mac version will look differently. If you notice t...
Tue, 20 Sep, 2022 at 6:27 PM
Simplify3D - Print Quality Troubleshooting Guide
If you are having trouble getting good quality prints, a solution may very well be just a few print-setting-adjustments away! Simplify3D's technical sup...
Tue, 20 Sep, 2022 at 6:39 PM

User Manuals

Quick Start Guide

Print Settings

Demo Print Downloads

Drivers Downloads

Slicer Software

User Manuals

Firmware Downloads

Creatr HS Video Library