Hello and thank you for choosing the Creatr HS for your printing needs.

 

The following solution will instruct you on how to adjust the print settings for the 3D models you wish to print on the Creatr HS in Simplify3D.


The first thing you must understand is that in order to find the best print settings for the models you wish to print you will need to print the models and keep adjusting the settings until you reach the desired quality.


1. Before adjusting the settings please make sure to have the latest software and firmware versions for the Creatr HS:

2. Once the updates are done, you can direct your attention to the print settings.The pictures which follow are a general explanation on how to adjust the settings to get better quality parts:


! Please note the values in the picture are random they are in no way the default settings you should use. You will have to adjust them based on the model you wish to print.


Thank you for reading the solution and for any other issues please do not hesitate to contact our Leapfrog Support Team.

 

We wish you happy printing!