Hello and thank you for choosing the Leapfrog 3D for your printing needs.
In the link below we will explain how to work around the 0.01% infill requirement in the Creatr 2.1 print profile.
As you know if you try to set the infill % to 0 you will have the following error:
If you choose the 0.01& infill you will get the following in your model:
A very thin line in the middle of your print.
To get rid of that line do the following:
- change the angle and angle increment to 0 and then the infill line to be generated on the border thus not allowing it to print.