Thank you for choosing the Creatr HS/HS XL for your printing needs. Please note that this solution applies to both printer types.
This solution will explain how to solve the issue presented in the picture below:
First you will need a USB keyboard.
Attach the keyboard to the front where the USB normally goes.
Press - CTRL + ALT + F1
A black screen will appear, it will ask for username, type:
and press enter. It will ask for password, type:
and press enter. You will not see any * or other palceholders for password when you type the password.
You will get a prompt, the next thing you need to type will remove the listings.
Change the directory to /dev/ (cd -> change directory
Next issue a commando to list all the folders and files (LiSt -> ls in non capitals)
for each device issue the command:
rm -rf /dev/FILL_IN_DIRECTORY_NAME_HERE
ONLY DELETE THE USB ONES, one of the devices will be the main SD card -> you will can delete the whole system if you don’t select the correct ones.
rm -rf /dev/USB\ DISK_
(here the “\” character makes sure you can type a space “ “ in the name)
(You can press TAB key to auto complete to a certain name)
Please make sure you type correct with capitals and spaces. You can then exit the menu by pressing:
CTRL + ALT + F7
Check if the “ghost” USB is disappeared by removing the keyboard and entering an USB stick.