Repair Instructions

Software solutions focusing on the Leapfrog Creatr HS 3D Printer and Simplify3D

Why Does My Printer Make Strange Noises when Moving on the Y-Axis?
Hello and thank you for choosing the Creatr HS for your printing needs. If you hear strange noises on the Y-axis movement of your Creatr HS there ar...
Thu, 7 Apr, 2016 at 9:16 AM
How to Open, Remove, and Replace the Creatr HS Print Head Housing
You may find yourself in the rare circumstance where you will need to replace the print head housing on your Creatr HS. If that's the case, don't wo...
Thu, 24 Mar, 2016 at 12:56 PM
How to Replace the Y Stepper Motor - Creatr HS Series
Hello and thank you for choosing the Creatr HS for your printing needs. The following solution will instruct you on how to replace the Y stepper mot...
Mon, 4 Apr, 2016 at 1:10 PM
Why is My Print Head not Moving in the Right Direction?
Hello and thank you for choosing the Creatr HS for your printing needs. If the printing head moves in the opposite direction when you use the Y and/...
Thu, 7 Apr, 2016 at 9:17 AM
It seems the glass bed of my 3D printer is not level.
Hello and thank you for choosing Leapfrog 3D for your printing needs.  Please note that this procedure only applies for the Creatr HS/HS XL and Crea...
Mon, 6 Feb, 2017 at 8:34 AM
How to replace the Motherboard of your Creatr HS
If it is the case that you have to replace the motherboard of your Creatr HS, please follow these instructions step by step. Tools: a ...
Mon, 17 Oct, 2016 at 12:08 PM
Why is my Print Bed not Moving?
Hello and thank you for choosing the Creatr HS for your printing needs. If you encounter problems with the Z movement of the print bed you have to c...
Thu, 7 Apr, 2016 at 9:18 AM
How do I solve the ghost USB flash drives which appear on my Creatr HS display?
Thank you for choosing the Creatr HS/HS XL for your printing needs. Please note that this solution applies to both printer types. This solution will ...
Wed, 1 Feb, 2017 at 12:10 PM
Should the Screws at the End of the Y-Axis Mounting Bracket Move?
Hello and thank you for choosing the Creatr HS for your printing needs. If you see the screws at the end of the Y shaft mounting bracket move...
Thu, 7 Apr, 2016 at 9:20 AM
Why Does My Creatr HS Print Head Snag?
Hello and thank you for choosing the Creatr HS for your printing needs. If you notice the X assembly belt is loose and is vibrating while you are pr...
Thu, 7 Apr, 2016 at 9:21 AM

User Manuals

Quick Start Guide

Print Settings

Demo Print Downloads

Drivers Downloads

Slicer Software

User Manuals

Firmware Downloads

Creatr HS Video Library