Repair Instructions

Software solutions focusing on the Leapfrog Creatr HS 3D Printer and Simplify3D

What are the Recommended Temperature Settings for Printing with ABS/PLA?
Hello and thank you for choosing Leapfrog 3D printers for your printing needs; Please note the following solution also applies to the Creatr HS, C...
Wed, 31 Aug, 2016 at 8:19 AM
Why is My Bed Not Reaching the Set Temperature Value?
Hello and thank you for choosing the Creatr HS for your printing needs. If your bed does not reach the temperature value you have set in the g-code,...
Thu, 7 Apr, 2016 at 9:24 AM
Oh No! My 3D Printed Fan Duct Melted. What do I do? - Creatr HS Series
It may happen that in some cases the 3D printed fan duct can melt when coming in contact with the extruders and will need to be replaced.         In...
Thu, 7 Apr, 2016 at 9:25 AM
Why do My Prints Look Under Extruded? How do I fix it? - Creatr HS
Hello and thank you for choosing the Creatr HS for your printing needs. The following solution will instruct you on what to check when you see your ...
Thu, 3 Mar, 2016 at 2:07 PM
Creatr HS Printer not connecting to PC (after updates)
"My Leapfrog Creatr HS Printer is not Connecting to the PC Even After the Software and Firmware Update. What do I do?" Hello and thank you for ch...
Wed, 11 Mar, 2020 at 9:00 AM
Why Does My Leapfrog Creatr HS Printer Stop Randomly During Printing? M999 Error
Hello and thank you for choosing the Creatr HS for your printing needs. If you notice your 3D printer stops randomly during printing please follow t...
Thu, 3 Mar, 2016 at 2:21 PM
How Can I Do Maintenance on My HS Print Bed Glass Without Connecting to the PC?
Here's a quick "hack" to those of you that would like to lower your Creatr HS series printer print bed and move your print head out of the wa...
Mon, 15 Feb, 2016 at 2:48 PM
What are the drawbacks of using the max printing speed on the Creatr HS?
Hello and thank you for choosing the Creatr HS for your printing needs. In the following solution you will be presented on what drawbacks can appear...
Mon, 25 Apr, 2016 at 12:15 PM
When the printer turns on the display does not properly boot up. What do I do?
Hello and thank you for choosing the Creatr HS for your printing needs. This solution is to show you a example of  a possible error which can ...
Mon, 30 May, 2016 at 12:43 PM

User Manuals

Quick Start Guide

Print Settings

Demo Print Downloads

Drivers Downloads

Slicer Software

User Manuals

Firmware Downloads

Creatr HS Video Library